|
|
|
|
|
|||
|
|
|
|
(click on pics to enlarge)
Here is a picture of the parts that come in the kit.
I did not use a lot of these and added my own bridge rectifier.
I first laid out some initial parts and started mocking up
the layout.
Keep in mind this IS NOT how the kit would normally
go together.
However it is a stock Bottlehead build. Only the layout has changed.
It is true to the original schematic.
Some more layout and some final assembly pics.
Shielded cables are hand laced with waxed cotton cord.
A combination of heat shrink and fiberglass cloth (Varglas) cover the remaining
hookups.